Now offering Fire and EMS Hero Wipes


traffic control items

28″ H.D. Collapsible Safety Cone 5-Pack

28″ Safety Cone – Collapsible Kit 5-Pack

28″ Safety Cone – Collapsible Kit 5-Pack

image223

 

5-Pack kit contains 5 – 28″ safety cones. Each cone has an 8 lb. weighted rubber base and collapses for storage in a car trunk, utility truck, or tool box.


Each Cone Features:

  • 8 lb. weighted rubber base
  • Collapses flat for easy storage
  • Made of durable nylon
  • Reflective 4″ and 6″ stripes
  • Includes 2 – blinking red LED lights (one for the top of the cone and one to illuminate the inside of the cone)
  • Includes the storage case that holds the cone and lights
  • Meets MUTCD specifications (4″ & 6″ reflective bands)
  • Meets NFPA 1901 Standards; Section 6.7.3 Miscellaneous Equipment
  • Requires 4 AAA batteries (included)


Dimensions : 16” L x 16” W x 16” H – 49 lbs


These cones are made with a durable rubber base that weighs 8 lbs. and can withstand road traffic and high winds.The cone material is a bright, durable nylon with 2 reflective silver bands, which can be seen

 up to 1000 feet away.

For added nighttime visibility, the included red LED lights flash or can be set in a steady-on position. Will operate the flashing light for 40-60 hours. All materials are highly durable and made to withstand outdoor conditions. 


5-pack kits are available for the 28” and 36” Cones to comply with national NFPA 1901 Fire Vehicle and Apparatus requirements.

28″ Safety Cone – Collapsible Kit 5-Pack

28″ Safety Cone – Collapsible Kit 5-Pack

28″ Safety Cone – Collapsible Kit 5-Pack

image224

 

28″ collapsible safety cone kit is compact and stores easily in a car trunk, utility truck, or tool box.  Set of 5 cones included in kit.


Cone Description:  Aervoe Safety Cones are full size traffic/safety cones designed to collapse to 2” for storage. Includes a red LED light for the top of the cone for greater night visibility and a storage case


  • Collapses flat for easy storage
  • Made of durable nylon
  • 4 lb. weighted base
  • 2 Reflective stripes
  • Blinking red LED beacon
  • Includes the storage case that holds the cone and light
  • Meets MUTCD specifications (4″ & 6″ reflective bands)
  • Meets NFPA 1901 Standards; Section 6.7.3 Miscellaneous Equipment
  • Requires 2 AAA batteries (included)


Applications:  roadside safety, construction sites, warehouse/retail hazard identification, emergency services personnel, tow trucks, and personal automotive safety.


5 Pack Case Dimensions: 

13” L x 13” W x 10.75” H – weighs 22 lbs

Individual Cone Dimensions: 

12.5” L x 12.5” W x 2.25” H – weighs 5 lbs

10′ Portable Speed Bump

Portable Speed Bump with LED Lights

Portable Speed Bump with LED Lights

image225

 

The Portable Speed Bump is designed for temporary placement on roads, parking lots, warehouse floors, etc., to slow vehicle speed. It is made of durable, impact and UV resistant polypropylene and will not fade or crack. It can withstand 20,000 pounds and has black rubber on the bottom to prevent sliding when being run over.

Rolls up for storage and has a handle on each end easy maneuverability. 

For best results place on an even or paved surface to eliminate slippage.


  • 10′ when extended
  • Rolls up for storage – 20″ diameter
  • Each section has high-intensity reflective tape on the front and back
  • Made of heat and cold resistant polypropylene
  • Will not fade or crack
  • Includes a durable nylon zipper bag for transportation and storage


Applications: Use in school zones, constructions sites, events, warehouse floors, or anywhere a portable, temporary speed bump is required to reduce speed.

Portable Speed Bump with LED Lights

Portable Speed Bump with LED Lights

Portable Speed Bump with LED Lights

image226

Choose this model if greater visibility is needed – day or night. This Portable Speed Bump includes both reflective strips and LED lights that operate in a slow flash, quad flash, or steady on. It is designed for temporary placement on roads, parking lots, warehouse floors, etc., to slow vehicle speed. 


It is made of durable, impact and UV resistant polypropylene and will not fade or crack. It can withstand 20,000 pounds and has black rubber on the bottom to prevent sliding when being run over.


Rolls up for storage and has a handle on each end easy maneuverability. For best results place on an even or paved surface to eliminate slippage.


  • 4 Sections include bright yellow LEDs on the front and back
  • 10′ when extended
  • Rolls up for storage – 20″ diameter
  • Each section has high-intensity reflective tape on the front and back
  • Made of heat and cold resistant polypropylene
  • Will not fade or crack
  • Includes a durable nylon zipper bag for transportation and storage


Applications: Use in school zones, constructions sites, events, warehouse floors, or anywhere a portable, temporary speed bump is required to reduce speed. Aervoe Portable Speed Bumps are designed for temporary placement on roads, parking lots, warehouse floors, etc., to slow vehicle speed. Each of the 25 yellow plastic body pieces has high intensity reflective conspicuity tape on the front and back for visibility. Both ends of this Speed Bump have molded handles to use to unroll and maneuver it into position. 4 of the sections have bright yellow LEDs on the front and back for greater visibility – night or day. These sections are evenly spaced across the length of the Speed Bump. One handle contains a rechargeable lithium ion battery and recharges using a unique magnetic charging adapter. A plug fits into the charging cavity when the Speed Bump is in use or not charging. It has 3 light patterns (slow flash, quad flash, and steady-on).

These Speed Bumps extend to 10 feet and will roll up into a 20” diameter for storage. Includes a heavy-duty nylon storage bag with durable strap handles.

Product dimensions: 20” L x 20” W x 10” H – 24lbs

TRAFFIC SAFETY BATON (XG410)

image227

Triple function: flashing warning and steady light


LED color available in Red

Uses 2xC batteries (not included)

Standard size: 13.3"L x 1.5"W

Fold and Roll Emergency Signs

image228

Complies with MUTCD standards 

 Ultra compact storage configuration

Sets up in under 20 seconds 

Utilizes kick release system for quick leg deployment 

Displays 36" signs, various legends (shown at left with 48" sign 12" (305mm) 

All aluminum and steel construction 

Dual torsion springs - a proven wind relieving system 

Features double or triple flagholder 

Telescoping aluminum legs with two position height adjustment and anti-skid foot pads