Sensible products

Post and Pin mounting kits from Sensible Products offer a simple solution to many mounting problems. As shown below, posts for bolt cutters fit in the “V” behind the cutting jaw and are ordered for the correct diameter to fit this “V”. Secured by a stainless pin and lanyard, the post allows the bolt cutter to be mounted in many positions for easy access and storage. One bolt cutter kit contains the proper post size when ordering and two tool clips for the handles.

Order Bolt Cutter Mounting Kits according to the proper diameter of the “V”.

Diameter to fit the proper “V” – Part Number

1/2″ “V” – BC500
3/4″ “V” – BC750
1.0″ “V” – BC100
1-1/4″ “V” – BC 1250

The Combination Holder adjusts to hold a threaded fitting in the 4” to 6” diameter range and a 4” or 5” storz coupling. The unique spring-loaded, capturing knob design eliminates specialized thread requirements. Each holder features selectable positioning of the capturing knobs to accommodate any size fitting in the 4” to 6” range. Thirty pound spring tensioning holds fittings securely while allowing fast on/off action. For storz, the self-locking feature easily mounts 4” to 5” storz couplings or adapters by dropping the adapter in the slots, pulling down, and it’s locked in place. To release the fitting, just lift up- nothing to turn, spin, or unscrew. Mounts with two flathead screws.

The Cylinder Bracket includes a back plate, long or short footplate, two cylinder clips, and a safety strap. Order by clip size and specify long or short footplate. 4” to 7” clips available.

Custom Engraved Labels can be added to tools and equipment to show locations, lengths, sizes, and manufacturers as well as all your other labeling needs. Several colors and 2 sizes available.

#124 – ½” x 4”
#110 – 1” x 10”

Red-W. – Yellow-B. GreenW. – Blue-W.
OrangeW. – Black-W.

The heavy duty Extinguisher Brackets are powder coated steel construction with adjustable rubbers straps.

Part No. E862 (for 5 – 10 lb. extinguishers or 4.5″ – 7.0″ cylinders)

Part No. E864 (for 10 – 20 lb. extinguishers or 6.0″ – 8.0″ cylinders)

The Gate Valve Mounting System with post and bracket can be used to mount ball     valves, water thieves, or other types of typical-styled products. A powder coated ¼” aluminum bracket and durable plastic mounting post make it suitable for interior or exterior use. A 1” center through hole is used for a hydrant wrench storage.

Order the Gate Valve Mounting Systems by specifying the appliance you want to mount. You may also order with or without the through-hole.

Jumbo Lok Mounting Brackets feature three separate pivot positions to adjust the grip ranges. Grip ranges start at .375 and extend to 3.250. 

This bracket is ideal for heavy duty mounting applications. 

Large Clamp Brackets are a durable rubber construction and have a large diameter capacity to accommodate a tool or part from 2.5” to a maximum of 9.5”, support 50 lbs., and securely hold many items in place. The base measures 6” x 7/8” and fastens in place using three #10 screws. 

The Mallet Bracket is designed with a depth so may hang a mallet or hammer that needs to be secured.

The Mallet and Wrench Bracket is designed with a depth so you may hang a hydrant wrench and mallet together, or whatever type of mallet or hammer that needs to be secured.

The Multi Rack bracket allows you to nest six tools together in a tight space. The rack design securely holds tools in place in the radiused designed hooks. Additional safety straps hold tension on all the tools. The two powder coated aluminum brackets may be positioned to best fit your needs in a cabinet. The Multi Rack will allow you to store multiple types, sizes, and styles of tools and maximize your space. Two mounting bolts secure each section of the rack 

The single Multiple-Size Fitting Holder adjusts to hold one large diameter fitting in the 4” to 6” range. The unique spring-loaded, capturing knob design eliminates specialized thread requirements. Each holder features selectable positioning of the capturing knobs to accommodate any size fitting in the 4” to 6” range. Thirty pound spring tensioning holds fittings securely while allowing fast on/off action. Mounts with two flathead screws.

The double Multiple-Size Fitting Holder adjusts to hold two large diameter fittings in the 4” to 6” range. The unique spring-loaded, capturing knob design eliminates specialized thread requirements. Each holder features selectable positioning of the capturing knobs to accommodate any size fitting in the 4” to 6” range. Thirty pound spring tensioning holds fittings securely while allowing fast on/off action. Mounts with two flathead screws.

Made from durable, easy to clean, high density polyethylene plastic, the Chanl Panl is a new universal mounting panel that allows the end user to arrange brackets in a cabinet using the unique slot and hole pattern without the need to drill holes for mounting brackets. Easily load all mounting hardware from the front of the Chanl Panl and secure in place with standard ¼ 20 bolts. No trick fasteners or special hardware