Now offering Fire and EMS Hero Wipes


Ready Rack

Located in Woodstock, Illinois, Groves Incorporated designs, engineers, assembles, and warehouses products for our three divisions. Both domestically and abroad, our products are manufactured to strict quality standards by fully vetted manufacturing companies. They are committed to providing the highest quality products at competitive prices, while constantly looking for opportunities to better solve their customer’s needs.


Some of the reasons why you should choose Ready Rack by Groves over the rest:


  • STRONGER & SAFER: Built with individual 1.25” square tubular frames to stand up to the demanding firefighting environment.
  • DEPARTMENT & DESIGN FRIENDLY: Open back design allows for easy wall access and use of outlets. No electrician or special wiring required.
  • USER FRIENDLY: Complete with safety and build instructions making it easy to install and maintain.
  • HEAVY DUTY / TIME TESTED: Powder coating will not fade or chalk under UV light conditions and stands up to a 184 hour salt spray test.
  • WE STAND BEHIND OUR PRODUCTS: Their units come complete with a one year limited warranty on manufacturer defect.
  • ORGANIZED & CUSTOMIZABLE: Keeps your gear organized. Custom applications available if special sizing is required


image36

Wall Mounted Red Rack

image37

 

  • 18"  20" or 24" wide compartments. 
  • Each unit comes complete with: adjustable boot shelf, adjustable helmet shelf, hanging pole the length of the unit, (2) appeal hooks per locker, & (1) name plate per locker
  • Made of heavy-duty steel with a red powder coated finish
  • Built with a tubular steel design
  • Security option available: lockable door and top security shelf (Security back frame can be ordered upon request)
  • Can be ordered in any run length thanks to our exclusive modular design
  • * Available in custom colors, with extended lead times, upon request. Additional fees may apply
  • Other accessories available.

Mobile Red Rack - Single Sided

image38

 

  • Red Rack Mobile Single Sided - 18", 20 " and 24" Compartments
  • Adjustable boot and helmet shelves
  • Adjustable apparel hooks
  • Label holder
  • Four swivel casters, two with foot operated brakes.
  • Hanging Pole to run the length of the unit.
  • Security option includes top security shelf, rear security panel and lockable door

Mobile Red Rack - Double Sided

image39

 

  • Red Rack Double Sided - 18" 20" and 24" Compartments
  • Adjustable boot and helmet shelves
  • Adjustable apparel hooks
  • Label holder
  • Four swivel casters, two with foot operated brakes.
  • Hanging Pole to run the length of the unit.
  • Security option includes top security shelf, rear security panel and lockable door

Backboard Rack

image40

 

  • Organized storage for back boards while not in use.
  • Holds up to eight boards at one time.
  • For use in fire departments, rescue squads and hospitals.
  • Available as wall mount or mobile unit

Multi Purpose Storage System

image41


Store a wide variety of equipment in a very small footprint with the Multiple Purpose Storage System. It can be configured to store 24 SCBA units, up to 32 air cylinders, up to 1,400′ of 2 1/2″ hose, or set up as a combination storage system depending on your Department 

Mobile Hose Cart - 2 Tier

image42

 

  • Holds up to 1300' of 2 ½" hose and has a 4,400 lb. capacity
  • MADE IN THE USA
  • Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5" from overall height of unit)
  • Made of heavy-duty steel with a durable red powder coat finish
  • Can easily support 100' coils
  • Can be used with Hose Winder (HW-1)
  • Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
  • Ships knocked down for freight savings

Mobile Hose Cart - 3 Tier

image43

 

  • Holds up to 2000' of 2 ½” hose and has a capacity of 4,400 lbs.
  • MADE IN THE USA
  • Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5" from overall height of unit)
  • Made of heavy-duty steel with a durable red powder coat finish
  • Can easily support 100' coils
  • Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
  • Can be used with Hose Winder (HW-1)
  • Ships knocked down for freight savings

Large Diameter Hose Winder

image44


Wind 100-foot sections of LDH up to 6″ wide in seconds. Having the ability to steer the winder while rolling the hose, the LDHW turns winding into a one-man operation. 


With no need to recharge batteries, downtime is drastically reduced. The LDHW drains the hose as you wind it, prolonging hose life.


 Reduces the risk of back injuries by limiting firefighter fatigue. 

Extractor

image45

 

  • MADE IN THE USA
  • Can wash 1-2 sets of turnout gear per load. Full wash cycle: 25-35 minutes
  • Runs on 120 volts (watts per load: 110-160 watt hours)
  • Stainless steel inner and outer tubs (capacity: 2 cu. Ft) and has a patented tub design
  • Easy soft-mount installation
  • No transmission or agitator to replace and no lower water seals
  • With fewer overall moving parts; Promotes longer life expectancy
  • Complete with manual /manufacturer’s warranty & Follows NFPA-1851 guidelines

Gear and Hose Dryer

image46

 

  • Factory preset temperatures ensure proper drying temperature for each unique clothing or turnout item
  • Made of heavy-duty steel construction with white powder coated finish
  • Comes complete with: (2) PPE hangers, hanging pole, (2) built-in door racks and (2) flat shelves
  • Convenient 120V 15 Amp breaker power
  • Additional accessories available
  • Follows all NFPA-1851 guidelines

Large PPE and Hose Dryer

image47

 

  • MADE IN THE USA
  • Custom built for firefighter turnout gear (PPE) and hose
  • Made from heavy-duty steel construction with a white powder coat finish
  • Accessories included: (4) PPE hangers, (2) boot hangers, (1) glove rack that holds 26 gloves
  • Additional accessories available including our MHD-42 Hose Drying Rack
  • Follows all NFPA-1851 guidelines
  • Comes complete with user manual


Ready Rack Bench

image48

 

  • Freestanding bench will not take up valuable space inside of your compartment
  • Steel legs with heavy-duty black powder coat finish
  • Seat is constructed of hardwood butcher block with a clear stain to provide wear resistance
  • Ships knocked down to reduce shipping costs

Dry Kwik Coat Hanger - Open Loop

image49

 

  • Made of 5/16” Zinc Chromate
  • Also available in close loop (DKH-C)
  • Made in the USA

Dry Kwik Coat Hanger - Closed Loop

image50

 

  • Made of 5/16” Zinc Chromate
  • Also available in open loop (DKH-O)
  • Made in the USA

Flat Dry Hanger

image51

 

  • Made of 5/16” Zinc Chromate
  • Made in the USA

Glove Dry Hanger

image52

 

  • Made of 5/16” Zinc Chromate
  • Made in the USA

Helmet Holder

image53

Relieves pressure from ratchet band and allows interior parts to dry out fast allowing helmet parts to last longer.